Tondo Products
Learn about Tondo’s Edge-IQ and Cabinet-IQ lighting, sensor, and device controls, and our Cloud-IQ cloud-based management software that brings it all together.
Tondo provides a complete, secure platform for Smart Lighting control, and creates a city-wide Bluetooth Mesh network to connect the sensors and devices that support your vision for a connected city.
Tondo Smart Lighting and Smart City Controllers
Edge-IQ Smart Lighting Controller
ALL-IN-ONE LIGHTING CONTROL AND SMART CITY NETWORK
Tondo’s Edge-IQ controllers provide control, management, and monitoring of virtually any fixture.
- True Plug and Play automated provisioning for rapid installation
- Real-time interactive control, management, and monitoring from Tondo’s Cloud-IQ Central Management System
- On-site configuration, diagnostics, and asset management Tondo’s Mobile-IQ app
- Real time scheduling delivers autonomous operation
- On-board Dual-SIM/eSIM LTE cellular cloud gateway eliminates the need for external gateways
- An onboard rules engine that enables autonomous operation of complex lighting profiles
- Sensor and device connectivity wirelessly via Bluetooth Mesh and DALI D4i
- Revenue-grade ANSI C12.20 & C136.50 or C136.52 power measurement
- Built-in GPS for auto-location of installed device
- Built-in accelerometer sensor for alerts on fallen poles or damaged devices
- Dedicated cryptography-on-chip for “root-of-trust” hardware security, secure over-the-air firmware updates, and device-to-cloud communications
- Support for lighting fixtures compatible with NEMA 3, 5, and 7-pin C137.41, and Zhaga (Book 18) sockets
- In-luminaire and in-pole options – designed to be installed in a fixture, or on or in a light pole
Automated Installation
FIELD INSTALLATION IN UNDER 30 SECONDS
Plug-and-play means many different things to different people. Here’s what we think it means:
- Plug
- Twist
- Automatic connection to Tondo’s Cloud-IQ CMS
- Automatic sensing of the lighting type and ballast driver required
- Automatic GPS mapping, controller, and connected device/lighting information sent to Tondo’s Cloud-IQ CMS
- Automatic download and activation of the correct controller configuration profile
- Success message sent to installer’s mobile device via the Tondo Mobile-IQ app for Android
No manual wiring, or in-field configuration required.
Tondo Smart Cabinet-IQ Controller
STREET LIGHT CABINET CONTROL
The Tondo Smart Cabinet-IQ Controller is designed for installation in lighting control cabinets to control lighting groups, measure electricity consumption, and monitor electricity quality.
- Sensor and actuator control via MODBUS over serial or Ethernet
- Integrated wireless LTE cellular gateway
- ANSI C12.20revenue-grade energy metering accuracy class 0.5S, four-quadrant active and reactive energy poly-phase static meter, Time-of-Use power tariffing
- Real-time monitoring of power quality information – true RMS, volts, amps, power, power factor, neutral current, voltage and current unbalance, frequency
- Alerting and notifications – Under/Over power monitoring, voltage monitoring, phase failure and daytime/night time consumption mismatches are reported in real-time to the central server
- Independent monitoring of breakers and circuits
- Control circuits through scheduled and manual interactions
- Operational monitoring and fault alerting of fixture/cabinet operations
- Remote ON/OFF control for lighting groups
- Centrally managed autonomously enacted time, astronomical and event-based control
- Built-in GPS for auto-location of asset
The Tondo Cabinet-IQ controller helps you turn city lighting control cabinets into an intelligent asset and controller for Smart City applications.
Tondo Cloud-IQ Central Management
REMOTE MONITORING, CONTROL AND ALERTS
Tondo’s Cloud-IQ Central Management System (CMS) provides a single pane of glass for cities to securely monitor, control, collect data from all of their connected network assets.
Cloud-IQ provides alerts for critical events, including pole-down, faults, power loss, vandalism, or tampering, or based on customized thresholds on the data collected by sensors and devices.
- Control, manage and monitor all connected lighting, cabinet controls, sensors, and devices
- GPS-based device mapping and monitoring of assets
- Group-, role-, and user access control to provide access on a “need-to-manage” basis
- Cloud connectivity via a encrypted secure private network unique for you
- High-availability “five-nines” or greater cloud services
- Unlimited number of control profiles can be assigned to groups, geographic areas, or any collection of devices
- Optimize lighting profiles for vehicle traffic, pedestrian, and cyclist safety
- Custom schedules can be assigned to any group, area, or collection of devices
- Auto-assignment of Tondo controller profiles for rapid installation
- Reporting in-application, and integration with your enterprise OMS and analytics software platforms for roll-up of enterprise data
- REST API-based integration with your other operations management systems and business analytics tools
Tondo gives you a modern, standards-based, easy-to-use CMS for all of your Smart City assets.
Tondo Mobile-IQ Field App
IN-FIELD DEPLOYMENT
Tondo’s Mobile-IQ field configuration app provides a handy tool for lighting technicians to quickly provision Tondo-controlled lighting.
Lighting profiles are set up in advance in the Tondo Cloud-IQ CMS. Each Tondo controller contains a unique encrypted ID that is assigned to each customer.
When you connect a new Tondo controller, simply scan the QR code with Mobile-IQ, and the Tondo Cloud-IQ CMS will confirm whether it is an authorized device for the customer network.
If authorized, it will automatically exchange information with the controller – location, configuration, electrical connection quality, network data, and even the details of the luminaire, driver, and lamp it is connected to.
You can also use the Mobile-IQ app to:
- Add custom fields of data such as internal inventory codes, installing technician – anything the customer wants to track
- Test connections and lighting control
- Track devices serviced by each lighting technician
- Upload new configurations back to the Tondo Cloud-IQ CMS
The Tondo Mobile-IQ app is an Android-native app.
Tondo Smart Lighting and Sensor Control
Tondo Edge-IQ
NEMA Socket
Tondo Edge-IQ
Zhaga Socket
Tondo Edge-IQ
Internal
DC Output voltage: 24V DC, 2W
Power Consumption: less than 1.5 watts @ 240V AC
Rated current: 16A @ 240VAC, 400W, 4300VA
AC Line In Fuse: 10A slow blow
Transient Protection: Minimum 350 joules 10Ka surge
ANSI C137.10 on 3-pin receptacles (on/off only - no dimming)
ANSI C137.41 on 5- and 7-pin receptacles
NEMA C137.4-2021
DC Output voltage: 24V DC, 2W
Power Consumption: less than 1.5 watts @ 240V AC
Rated current: 16A @ 240VAC, 400W, 4300VA
AC Line In Fuse: 10A slow blow
Transient Protection: Minimum 350 joules 10Ka surge
Compliant with Zhaga Book 18
DC Output voltage: 24V DC, 2W
Power Consumption: less than 1.5 watts @ 240V AC
Rated current: 16A @ 240VAC, 400W, 4300VA
AC Line In Fuse: 10A slow blow
Transient Protection: Minimum 350 joules 10Ka surge
Internally installed in-pole with option to install in OEM lamp at point of manufacture
Relative humidity: 5% to 99% non-condensing
Ingress: IP66 Class per IEC 60529
Relative humidity: 5% to 99% non-condensing
Ingress: IP66 Class per IEC 60529
Relative humidity: 5% to 99%
autonomous operation in the event of network disconnects
Dual cellular networks with failover
Onboard GLONASS/GPS with global coverage
Integrated accelerometer for vibration and tilt monitoring
Burn time and cycle counters
Operational status monitoring
Output status monitoring
Sensors: Support for any DALI D4i or LSI connected sensor
Security: hardware-based cryptography with unique key root-of-trust
Power Metering and Monitoring
Billing-grade ANSI C12.20/C136.50 metering
Voltage
Accuracy Class 0.5S
Burn time
Cycle counters
AC Voltage (RMS, average)
Current (RMS, average)
Power (RMS, average)
Power frequency
Power factor
Power load
Lighting circuit power load
Autonomous operation in the event of network disconnects
Dual cellular networks with failover
Onboard GLONASS/GPS with global coverage
Integrated accelerometer for vibration and tilt monitoring
Burn time and cycle counters
Operational status monitoring
Output status monitoring
Sensors: Support for any DALI D4i or LSI connected sensor
Security: hardware-based cryptography with unique key root-of-trust
Power Metering and Monitoring
Billing-grade ANSI C12.20/C136.52 metering
Voltage
Accuracy Class 0.5S
Burn time
Cycle counters
AC Voltage (RMS, average)
Current (RMS, average)
Power (RMS, average)
Power frequency
Power factor
Power load
Lighting circuit power load
Autonomous operation in the event of network disconnects
Dual cellular networks with failover
Onboard GLONASS/GPS with global coverage
Integrated accelerometer for vibration and tilt monitoring
Burn time and cycle counters
Operational status monitoring
Output status monitoring
Sensors: Support for sensor over DALI D4i on LSI connection
Security: hardware-based cryptography with unique key root-of-trust
Power Metering and Monitoring
Billing-grade ANSI C12.20/C136.52 metering
Voltage
Accuracy Class 0.5S
Burn time
Cycle counters
AC Voltage (RMS, average)
Current (RMS, average)
Power (RMS, average)
Power frequency
Power factor
Power load
Lighting circuit power load
Integrated DALI power supply supports up to 6 LED drivers
0-10V (IEC60929 Annex E, ANSI C82.11), 1-10V, and 10-0V dimming - dynamically configurable, sinks up to 5mA
Linear and logarithmic dimming
Integrated relay with maximum switching load 20A
Integrated DALI power supply supports up to 6 LED drivers
0-10V (IEC60929 Annex E, ANSI C82.11), 1-10V, and 10-0V dimming - dynamically configurable, sinks up to 5mA
Linear and logarithmic dimming
Integrated relay with maximum switching load 20A
Integrated DALI power supply supports up to 6 LED drivers
0-10V (IEC60929 Annex E, ANSI C82.11), 1-10V, and 10-0V dimming - dynamically configurable, sinks up to 5mA
Linear and logarithmic dimming
Integrated relay with maximum switching load 20A
Dual cellular SIM/e-SIM
Bluetooth: Bluetooth Beacon, Bluetooth 5 LE, Bluetooth Mesh
Integrated dual high performance integrated antennas
Dual cellular SIM/e-SIM
Bluetooth: Bluetooth Beacon, Bluetooth 5 LE, Bluetooth Mesh
Integrated dual high performance integrated antennas
Dual cellular SIM/e-SIM
Bluetooth: Bluetooth Beacon, Bluetooth 5 LE, Bluetooth Mesh
Integrated dual high performance integrated antennas
RoHS per 2011/65/EU & amendments
EN/IEC 60068-2-1:2007
EN 61000-3-2:2014
DALI/DALI-2/DALI D4i compatible
ANSI C136.10
ANSI C136.41
ANSI C136.48
ISO 27001:2013 December 2022
Israel EN 302 208
UL94V-0 Flame retardant ABS or Epoxy molding
RoHS per 2011/65/EU & amendments
EN/IEC 60068-2-1:2007
EN 61000-3-2:2014
DALI/DALI-2/DALI D4i compatible
ANSI C136.10
Zhaga Book 18 v3
ISO 27001:2013 December 2022
Israel EN 302 208
UL94V-0 Flame retardant ABS or Epoxy molding
RoHS per 2011/65/EU & amendments
EN/IEC 60068-2-1:2007
EN 61000-3-2:2014
DALI/DALI-2/DALI D4i compatible
ISO 27001:2013 December 2022
Israel EN 302 208
UL94V-0 Flame retardant ABS or Epoxy molding
Tondo Cabinet Control Solutions
Tondo Cabinet-IQ Controller
Designed for reliability and 24/7 operation
DIN-rail and wall mount options
Power Consumption: 9W
Output Voltage: 0.15A/24V AC/DC / DC 8V-36V
Relative Humidity: 10% to 90% non-condensing
Impact Resistance: IK07 per IEC62262
Ingress: IP30 Rated
Integrated GPS
1 x Digital Input
1 x Digital Output
4 x 250V/5A AC Analog Outputs
1 x .15A/24V Solid-State Relay
Optional Cabinet I/O Expansion
Optional 1 x MODBUS RS-232/485 serial
Optional Electrical Metering and Measurement (EMM) Module that includes:
1 x Digital Input 5V DC (dry contact)
1 x Solid-State Relay 0.15A/24DC (dry contact)
MODBUS RTU over RS-485 Serial @ 115.2 kb/s
90 day data retention
3 x Current Channels - 1A, 5A, 63A
Energy Measurement: AC Voltage (RMS, Average), Current (RMS, Average), Power (RMS, Average), Power Frequency, Power Factor, Controller Power Load, Lighting Circuit Power Load, Individual voltage & current harmonic spectrum, Harmonic angles up to 40th order harmonic, Voltage and current THD, TDD and K-Factor, Measurement range 15-480/828V AC (L-N/L-L), Measurement frequency range 25-400 Hz
Electricity Metering and Measurement Module Expansion Options (select one of the following):
4 x Analog Output with available range options: ±1 mA, max. load 5 kΩ, 0-20mA, 0-1mA, 4-20mA, 0-1mA,0-3mA,±3 mA,0-5mA, ±5 mA
4 x Digital Input (dry contact) + 2 x Relay 250V/5A AC
4 x Digital Input (dry contact) + 2 x Solid-State Relay 250V / 0.1A AC
4 x Digital Input (dry contact) + 365-Day Real-Time Clock Backup
12 x Digital Input (dry contact 48V, 125V or 250V) + 4 x Relay 250V/5A AC
1 x Solid State Relay - 0.15A/250V AC/DC
1 x Electromechanical Relay 5A/250V AC; 5A/30VDC
1 x RS-232/422/485 up to 115.2 kbps supporting MODBUS RTU, DNP3, SATEC ASCII, IEC 60870-5-101
Optional 48-hour UPS for complete operational continuity
EMI: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-19 V2.1.0, Draft EN 301 489-52 V1.1.0
ESD: EN 61000-4-2:2009
RS: EN 61000-4-3:2006 + A1:2008 + A2:2010
EFT: EN 61000-4-4:2012
Surge: EN 61000-4-5:2014
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2004
RF: EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.2, EN303 413 V1.1.1
Safety: EC 62368-1:2014, EN 62368-1:2014 + A11:2017, EN 50665:2017, EN 62311:2008
Tondo Central Management System
Tondo Smart Cloud-IQ CMS
Request a Live Demonstration
We’ll walk you through a real-world street lighting deployment and show you how easy it will be to transform your roadway lighting assets into a Smart City platform.
Tondo Product FAQ
Has Tondo deployed to large projects?
Yes. Tondo’s individual projects have exceeded 100,000 lamps.
Can we install Tondo CMS in a private cloud?
Can you create custom reports in Tondo's Cloud-IQ CMS?
What does Tondo mean by "plug and play"?
Once connected, a Tondo controller will query the type of lighting it is connected to, the sensors or devices connected to it, the GPS/GLONASS location data, and send that and the device information to the Tondo Cloud-IQ CMS and apply a default or custom profile to the device for automated configuration and instant operation.
How secure is a Tondo device and network?
Tondo’s controllers use the ARM Cryptocell 310 Security-on-Chip (SoC) that enables each device to be secured with a unique key so that a successful attack on one device does not compromise the network or other devices.
These keys are not stored in the controller firmware but are rather stored in a protected vault on the Cryptocell 310.
The Tondo SoC also secures over-the-air firmware updates (FOTA) so that an attacker cannot upload a corrupted firmware update to any device.
You can read more about the capabilities of the ARM Cryptocell 300 family at this link.
Does Tondo provide pre-sale support to partners?
Absolutely. Just choose one of the buttons on our website to get in touch, and we will work with designers, architects, and systems integrators on their projects and proposals.
Is Tondo looking for new distributors or channel partners?
Yes. We are looking for leading distributors, systems integrators, and channel partners who have great relationships with their customers and want to add the best Smart Lighting and Smart City IoT network solution to their line cards.
Contact us using the Contact Us button on this page, and let’s talk!
Does every Tondo controller need a cellular connection?
No. Tondo controllers connect with each other, and use any controller with the cellular (EGPRS or LTE 4G (which works across a 5G network) as a “gateway” to communicate with the Tondo Cloud-IQ Central Management Software (CMS).
This significantly reduces both device costs as well as the costs of cellular data communications.
Am I locked into a proprietary solution?
No. Tondo’s devices are based on established technology standards for connection (DALI, DALI2, D4i, ANSI C136.10, ANSI C136.41, Zhaga Book 18, MODBUS, Bluetooth 5 LE, EGPRS, LSI analog, and LTE 4G).
We are preparing for TALQ certification that will be an over-the-air firmware update to existing devices so that our customers can choose how to manage their Tondo-connected devices.
Tondo provides a documented API for integration with third-party software and custom software applications.
With Tondo, your investment – and data – is secure.
What happens if my cellular provider's network goes down?
Tondo devices will operate with their current profile stored in the firmware autonomously. Dimming and on/off operations are not depedent on an “always-on” cellular network connection.
Built-in sensor data is cached in the controllers until a connection is restored to prevent loss of data.
Any pending updates sent from the CMS will be updated when the connection is restored.
our partners
